Product Categories

Download Data Sheet

FREE Technical Articles

Essential Article for Medical Manufacturers
Paper published in IAPD details the important considerations medical manufacturers must account for when developing products.
Get Your FREE Article.

Advancement of Thermoplastics in Aerospace
Get Your FREE Article.

Ensinger Food Grade Plastics - History of Innovation
Get Your FREE Article.

Engineering 185°F - 300°F | Polyesters

HYDEX 4101L lubricated PBT

HYDEX® 4101 & 4101L (lubricated) is a very stable chemical compound that can withstand high impact without deterioration. It is approved for direct contact with food by the FDA and is ideal for machined parts in food processing equipment. HYDEX™ 4101 has excellent resistance to typical cleaning chemicals such as chlorine and caustic solutions and has a very low moisture absorption rate, as much as 15 times less than nylon.

  • Good chemical resistance properties
  • High impact strength
  • A wear factor up to 50% better then PET-P
  • Very low moisture absorption rate
  • Excellent machining qualities
  • No center line porosity

HYDEX® 4101 & 4101L (lubricated) exhibits a broad range of outstanding properties for a variety of applications, especially in the food processing industry. It is ideal for applications such as cams, bearings, gears, food pistons, wear strips, scraper blades, valve bodies and conveyor components.

  Properties Condition Units Value
Physical Chemical Designation PBT
Filler Lubricated
Density g/cm3 1.36
Mechanical Tensile Modulus @ 73 °F PSI 350,000
Tensile Strength @ Yld @ 73 °F PSI 6,600
Tensile Strength @ Brk @ 73 °F PSI 6600
Shear Strength @ 73 °F PSI
Elongation @ Yld @ 73 °F % 30
Elongation @ Brk @ 73 °F %
Flexural Modulus @ 73 °F PSI 350,000
Flexural Strength @ 73 °F PSI 11,500
Compressive Modulus @ 73 °F PSI 275000
Compressive Strength @ 73 °F, 10% strain PSI 10500
Izod (charpy) Impact Strength @ 73 °F ft-lbs/in 0.9
Rockwell Hardness @ 73 °F M (R) Scale
Coefficient of Friction Static 0.08
Coefficient of Friction Dynamic, 40 PSI, 50 FPM 0.11
Wear (K) Factor in3-min/ft-lbs-hr 38*10-10
Limiting PV psi-fpm 15,700
Thermal Vicat Softening Point °F
Melting Temperature °F
Heat Deflection Temperature @ 66 °F
Heat Deflection Temperature @ 264 °F 195
Service Temperature Intermittent °F
Service Temperature Long Term °F 221
Thermal Expansion (CLTE) in/in/°F
Specific Heat BTU/lb-°F
Thermal Conductivity BTU-in/hr-ft2-°F
Electrical Surface Resistivity ohms/square
Volume Resistivity ohm-cm
Dielectric Strength V/mil
Dielectric Contant @ 60 HZ, 73 °F, 50% RH
Dissipation Factor @ 60 Hz, 73 °F
Other Moisture Absorption @ 24 hrs, 73 °F % 0.07
Moisture absorption @ Saturation, 73 °F %
Flammability UL 94
Food Grade Y
Relative Cost $$ $$