Product Categories

Download Data Sheet

FREE Technical Articles

Essential Article for Medical Manufacturers
Paper published in IAPD details the important considerations medical manufacturers must account for when developing products.
Get Your FREE Article.

Advancement of Thermoplastics in Aerospace
Get Your FREE Article.

Ensinger Food Grade Plastics - History of Innovation
Get Your FREE Article.

General Industrial < 185°F | Thermoplastic Elastomer (TPE)

TECADUR TPE

  • Excellent impact strength
  • High toughness
  • Good damping
  • High fatigue strength
  Properties Condition Units Value
Physical Chemical Designation TPE
Filler
Density g/cm3 1.19
Mechanical Tensile Modulus @ 73 °F PSI 26,100
Tensile Strength @ Yld @ 73 °F PSI 2,030
Tensile Strength @ Brk @ 73 °F PSI
Shear Strength @ 73 °F PSI
Elongation @ Yld @ 73 °F %
Elongation @ Brk @ 73 °F % 34
Flexural Modulus @ 73 °F PSI 27,600
Flexural Strength @ 73 °F PSI
Compressive Modulus @ 73 °F PSI
Compressive Strength @ 73 °F, 10% strain PSI
Izod (charpy) Impact Strength @ 73 °F ft-lbs/in no break
Rockwell Hardness @ 73 °F M (R) Scale
Coefficient of Friction Static
Coefficient of Friction Dynamic, 40 PSI, 50 FPM
Wear (K) Factor in3-min/ft-lbs-hr
Limiting PV psi-fpm
Thermal Vicat Softening Point °F
Melting Temperature °F 394
Heat Deflection Temperature @ 66 °F 356
Heat Deflection Temperature @ 264 °F 113
Service Temperature Intermittent °F 185
Service Temperature Long Term °F 167
Thermal Expantion (CLTE) in/in/°F 8.89*10-5
Specific Heat BTU/lb-°F
Thermal Conductivity BTU-in/hr-ft2-°F
Electrical Surface Resistivity ohms/square 2*1015
Volume Resistivity ohm-cm 2*1015
Dielectric Strength V/mil
Dielectric Contant @ 60 HZ, 73 °F, 50% RH
Dissipation Factor @ 60 Hz, 73 °F
Other Moisture Absorption @ 24 hrs, 73 °F %
Moisture absorption @ Saturation, 73 °F %
Flammability UL 94 HB
Food Grade Y
Relative Cost $$ $