Product Categories

Download Data Sheet

FREE Technical Articles

Essential Article for Medical Manufacturers
Paper published in IAPD details the important considerations medical manufacturers must account for when developing products.
Get Your FREE Article.

Advancement of Thermoplastics in Aerospace
Get Your FREE Article.

Ensinger Food Grade Plastics - History of Innovation
Get Your FREE Article.

General Industrial < 185°F | Polyethylene

TECAFINE® HDPE

  • Broad chemical compatibility
  • Easy to machine
  • Good impact strength
  • Low moisture absorption
  Properties Condition Units Value
Physical Chemical Designation HDPE
Filler
Density g/cm_ 0.95
Mechanical Tensile Modulus @ 73 °F PSI 85,000
Tensile Strength @ Yld @ 73 °F PSI 3,400
Tensile Strength @ Brk @ 73 °F PSI
Shear Strength @ 73 °F PSI
Elongation @ Yld @ 73 °F %
Elongation @ Brk @ 73 °F % >100
Flexural Modulus @ 73 °F PSI 120,000
Flexural Strength @ 73 °F PSI 3,800
Compressive Modulus @ 73 °F PSI
Compressive Strength @ 73 °F, 10% strain PSI
Izod (charpy) Impact Strength @ 73 °F ft-lbs/in 1.94
Rockwell Hardness @ 73 °F M (R) Scale (54)
Coefficient of Friction Static
Coefficient of Friction Dynamic, 40 PSI, 50 FPM
Wear (K) Factor in_-min/ft-lbs-hr
Limiting PV psi-fpm
Thermal Vicat Softening Point °F 261
Melting Temperature °F
Heat Deflection Temperature @ 66 °F 75
Heat Deflection Temperature @ 264 °F
Service Temperature Intermittent °F
Service Temperature Long Term °F 248
Thermal Expantion (CLTE) in/in/°F
Specific Heat BTU/lb-°F
Thermal Conductivity BTU-in/hr-ft_-°F
Electrical Surface Resistivity ohms/square
Volume Resistivity ohm-cm
Dielectric Strength V/mil
Dielectric Contant @ 60 HZ, 73 °F, 50% RH
Dissipation Factor @ 60 Hz, 73 °F
Other Moisture Absorption @ 24 hrs, 73 °F %
Moisture absorption @ Saturation, 73 °F %
Flammability UL 94
Food Grade Y
Relative Cost $